RELX devices upgrades and spare parts (6.5 ml) (v4)
RELX devices advice for Trinidad, covering taste profile, what to look for and where the trade-offs actually sit.
The gap between a mid-range and a premium relx devices narrows once you know which components you actually use. The included spare coils are useful for the first fortnight, after which you will be ordering your own.
Most Trinidad buyers start with a well-known brand name and then discover that fit and coil availability matter far more. Expect roughly 1235 full puffs from a charge at 0 mg/ml, based on average session length in our testing.
Two things to check before ordering: the USB-C socket on the base and whether the 0.2 Ω dual mesh coil is the newer generation. Battery behaviour is where the AEKU Slim earns its keep: the 1500 mAh cell holds a usable charge for most of a day at 90 and recharges over USB-C. We would pair the AEKU Slim with a 20:80 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1235 full puffs from a charge at 0 mg/ml, based on average session length in our testing. Delivery across Trinidad is typically two to four working days with tracked dispatch, and returns are straightforward within the standard window.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 0.2 Ω dual mesh coil changes the draw character compared with the 20:80 PG/VG liquid sitting in the chamber. The Arctic White finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below. For disposable buyers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.
Flavour tracking stays consistent from the first day to roughly the 0.2 Ω dual mesh mark before the profile flattens and a swap makes sense. In Trinidad, availability of the 0.2 Ω dual mesh coil is the practical bottleneck, not the device itself. The narrow bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
Comparing this against a 20:80 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. Vapour production is more than adequate at 90, and pushing beyond that adds heat rather than anything worth carrying. We would pair the AEKU Slim with a 20:80 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
Specifications
The specification sheet is where the real trade-offs show.
| Reference model | AEKU Slim |
|---|---|
| Brand family | Vapouriz |
| Battery capacity | 1500 mAh |
| Power range | 90 W |
| Liquid capacity | 2.0 ml |
| Coil | 0.2 Ω dual mesh |
| Bottle size | 100 ml |
| Liquid ratio | 20:80 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | anodised aluminium |
| Charge port | USB-C |
| Connector | 510 bottom pin |
| Airflow | mesh window |
| Mouthpiece | narrow bore |
Flavour and performance notes
A representative profile is Blueberry Muffin: creamy, sweet, described as baked blueberry with a soft crumb. On a 20:80 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.2 Ω dual mesh mark before the coil begins to mute it.
Practical considerations in Trinidad
Availability in Trinidad is the factor that decides most outcomes here. Confirm the 0.2 Ω dual mesh and the USB-C are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and TTD rates move, so treat prices as current rather than fixed.
Take the time to get it right the first time; the difference shows up over months of use rather than days.