How we test RELX devices in Trinidad (2025) (v4)
RELX devices advice for Trinidad, covering buying guide, what to look for and where the trade-offs actually sit.
Budget matters in Trinidad, but with relx devices the cheapest option is rarely the one that lasts. For flavour seekers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.
Most Trinidad buyers start with a well-known brand name and then discover that fit and coil availability matter far more. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.2 Ω mesh mark before the profile flattens and a swap makes sense. In Trinidad, availability of the 1.2 Ω mesh coil is the practical bottleneck, not the device itself.
Charging over Type-C fast charge takes about 62 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Type-C fast charge socket on the base and whether the 1.2 Ω mesh coil is the newer generation. Battery behaviour is where the Asvape Minikit earns its keep: the 2500 mAh cell holds a usable charge for most of a day at 50 and recharges over Type-C fast charge.
If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 30:70 PG/VG blend, so if you prefer a smoother draw, mix accordingly. The mesh tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
What surprised us most was how little the 1.2 Ω mesh coil changes the draw character compared with the 30:70 PG/VG liquid sitting in the chamber. The Cobalt Blue finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the 510-X takes a small amount of care to keep clean, which we cover in the maintenance section below.
For flavour seekers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. We would pair the Asvape Minikit with a 30:70 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. The throat hit is noticeably firmer than a 30:70 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
Replacement coils are widely available, and the 1.2 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.2 Ω mesh coil changes the draw character compared with the 30:70 PG/VG liquid sitting in the chamber.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Asvape Minikit |
|---|---|
| Brand family | Eleaf |
| Battery capacity | 2500 mAh |
| Power range | 50 W |
| Liquid capacity | 5.0 ml |
| Coil | 1.2 Ω mesh |
| Bottle size | 50 ml |
| Liquid ratio | 30:70 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | polycarbonate |
| Charge port | Type-C fast charge |
| Connector | 510-X |
| Airflow | dual bottom |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Blue Raspberry Frost: sweet, tangy, described as sharp blue raspberry with a long cold finish. On a 30:70 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.2 Ω mesh mark before the coil begins to mute it.
Practical considerations in Trinidad
Availability in Trinidad is the factor that decides most outcomes here. Confirm the 1.2 Ω mesh and the Type-C fast charge are both in stock before committing, and check that the 510-X matches your existing device if you already own hardware. Duty and TTD rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.