How we test RELX devices in Trinidad (v11)
RELX devices advice for Trinidad, covering strength guide, what to look for and where the trade-offs actually sit.
Anyone who has compared relx devices options in Trinidad quickly learns that specification lists only tell part of the story. Comparing this against a 65:35 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Local availability in Trinidad shapes the practical answer more than the marketing does. Vapour production is more than adequate at 25, and pushing beyond that adds heat rather than anything worth carrying.
Vapour production is more than adequate at 25, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 65:35 PG/VG liquid sitting in the chamber. The Forest Green finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Comparing this against a 65:35 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 1531 full puffs from a charge at 3 mg/ml, based on average session length in our testing.
Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over Micro-USB takes about 42 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the Micro-USB socket on the base and whether the 1.0 Ω mesh coil is the newer generation.
Battery behaviour is where the Voopoo Drag earns its keep: the 1200 mAh cell holds a usable charge for most of a day at 25 and recharges over Micro-USB. We would pair the Voopoo Drag with a 65:35 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Voopoo Drag |
|---|---|
| Brand family | Lost Vape |
| Battery capacity | 1200 mAh |
| Power range | 25 W |
| Liquid capacity | 2.0 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 1.0 ml |
| Liquid ratio | 65:35 PG/VG |
| Nicotine strength | 3 mg/ml |
| Material | anodised aluminium |
| Charge port | Micro-USB |
| Connector | magnetic contact |
| Airflow | adjustable sliding |
| Mouthpiece | silicone tip |
Flavour and performance notes
A representative profile is Cinnamon Danish: sweet, spiced, described as cinnamon pastry with a light glaze. On a 65:35 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Trinidad
Availability in Trinidad is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the Micro-USB are both in stock before committing, and check that the magnetic contact matches your existing device if you already own hardware. Duty and TTD rates move, so treat prices as current rather than fixed.
If you would rather talk it through, use the contact details below and we will answer directly.
