RELX devices for diy mixers: what works (0.6 ohm mesh)
RELX devices advice for Trinidad, covering cost factors, what to look for and where the trade-offs actually sit.
There is no single best relx devices for everyone in Trinidad, and anyone telling you otherwise is selling something. For diy mixers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.
Budget matters in Trinidad, but with relx devices the cheapest option is rarely the one that lasts. Worth noting that the 510 thread takes a small amount of care to keep clean, which we cover in the maintenance section below.
Pricing in Trinidad shifts with import duty, so the figures here reflect current TTD rates rather than a fixed list price. Airflow control on the Uwell G2 is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Vapour production is more than adequate at 40, and pushing beyond that adds heat rather than anything worth carrying.
The throat hit is noticeably firmer than a 70:30 PG/VG blend, so if you prefer a smoother draw, mix accordingly. The included spare coils are useful for the first fortnight, after which you will be ordering your own. Airflow control on the Uwell G2 is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.
For diy mixers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month. The throat hit is noticeably firmer than a 70:30 PG/VG blend, so if you prefer a smoother draw, mix accordingly.
Comparing this against a 70:30 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 1.6 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. Expect roughly 571 full puffs from a charge at 0 mg/ml, based on average session length in our testing.
Battery behaviour is where the Uwell G2 earns its keep: the 2500 mAh cell holds a usable charge for most of a day at 40 and recharges over Micro-USB. We would pair the Uwell G2 with a 70:30 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 1.5 Ω regular coil is the sensible default to keep in stock.
The build quality on Uwell G2 is a step above most of what sits in the same price bracket, and the finish resists the chipping that usually shows after a few months of pocket carry. What surprised us most was how little the 1.5 Ω regular coil changes the draw character compared with the 70:30 PG/VG liquid sitting in the chamber. Vapour production is more than adequate at 40, and pushing beyond that adds heat rather than anything worth carrying.
Specifications
Here is what the engineering actually delivers, without the marketing language.
| Reference model | Uwell G2 |
|---|---|
| Brand family | Bonita |
| Battery capacity | 2500 mAh |
| Power range | 40 W |
| Liquid capacity | 1.6 ml |
| Coil | 1.5 Ω regular |
| Bottle size | 300 ml |
| Liquid ratio | 70:30 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | anodised aluminium |
| Charge port | Micro-USB |
| Connector | 510 thread |
| Airflow | mesh window |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Lemon Lime Soda: citrusy, crisp, described as zesty lemon over lime with gentle carbonation. On a 70:30 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.5 Ω regular mark before the coil begins to mute it.
Practical considerations in Trinidad
Availability in Trinidad is the factor that decides most outcomes here. Confirm the 1.5 Ω regular and the Micro-USB are both in stock before committing, and check that the 510 thread matches your existing device if you already own hardware. Duty and TTD rates move, so treat prices as current rather than fixed.
Take the time to get it right the first time; the difference shows up over months of use rather than days.